A manufacturer specializing in plastic products

The processing of plastic tray is unqualified

by:Qusheng     2020-11-06
substandard treatment method by analyzing the reason of unqualified products. A, materials exist de-fatting parameter is not in conformity with the provisions, or raw materials caused by the melting point is not unified, this situation is more commonly seen in board material. Many plastic tray in order to save cost, buy some small chemical raw material, its various parameters are not stable or not. Manufacturer of plastic tray 2, reworked material proportion is too large, the current situation of domestic plastic tray is some customer need high quality plastic tray, some customers pursue low price of plastic tray, it promoted the plastic pallet manufacturers consistently seek more cost-effective formula, add reworked material is a direct and effective way. But how much and what proportion is not every plastic tray enterprises can grasp. General large plastic pallet company has its own laboratory can according to the different formula of different modulation of renewable materials. Three, machine parameter setting is not standard, such as clamping time, injection pressure, cooling time and stripping time and so on, a slight irregularities can cause the deformation of plastic tray products or lack of material. Fourth, improper use of color master or toner. General Plastic collapsible cratein the majority with blue or red, but the customer sometimes requires special color, this will need to use the toner to allocate different color, if the use of toner proportion does not guarantee every pot materials are consistent or not stir even, can produce off color problem. Plastic pallet manufacturers in view of the above several causes of the plastic tray is unqualified products we respectively discuss the solution. Because de-fatting waste produced by the unqualified raw materials, if there is no color difference or deformation, can be a level, for the price of renewable materials sales. Because the color difference caused by the unqualified products, although nominally we called unqualified product, but actually starting load and static load parameters of military qualified, this case can be used for product one-time export, superior to avoid losses. Because of lack of material or deformation caused by the plastic tray, unqualified products can crush after secondary use, excellent for low-end products. Above is the manufacturer of plastic pallet sorting data, hope to be of help.
looking for the best deal while getting a quality is usually the number-one objective for most plastic crates wholesale manufacturer.
To know more about and the market trends, go to Qusheng Plastics.
The plastic crates wholesale-type wholesale plastic pallet is poised to lead the plastic crates wholesale market.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...