Why is PP anti-static hollow board more advantageous than solid board
Why is PP anti-static hollow board more advantageous than solid board?
PP plastic hollow board can be used as a substitute for cardboard, wood, aluminum, glass and other boards in many fields. This is due to the material properties of PP hollow board. Plastic hollow boards have more advantages than solid boards. So what are the advantages of PP plastic hollow board compared with solid board? Let’s enumerate them one by one below:
1. The mechanical properties are better than solid plates
The special structure of pp hollow plates makes them have good toughness, impact resistance and compressive strength. It has excellent mechanical properties such as high cushioning and shockproof, high stiffness and good flexibility. These mechanical properties cannot be achieved by corrugated paper and honeycomb paperboard.
2. It has anti-static and conductive functions.
Using methods such as modification, mixing, and surface spraying can make the plastic hollow sheet have anti-static or conductive properties.
3. Stable chemical performance
It can be waterproof, moisture-proof, insect-proof, and anti-corrosion. Compared with corrugated paper, honeycomb paper and wood board, it has obvious advantages.
4. The manufacturing process has less pollution and can be reused.
Although it is difficult to degrade, the overall environmental protection effect is obviously superior from the perspective of the whole process from raw materials to manufacturing to use.
5. Lighter than solid board.
The hollow board uses less plastic corrugated board consumables, low cost and light weight.
6. Heat insulation and sound insulation are better than solid boards
The pp plastic hollow board has a hollow structure, which makes its heat and sound transmission effect significantly lower than that of a solid plastic board, so it has Has good heat insulation and sound insulation functions.
7. Shorter processing time for hollow plates
If the wall thickness is too large, the molding time will be prolonged. According to calculations, the wall thickness will be doubled and the cooling time will be 4 times longer. Plastic hollow plates change the method of improving mechanical strength from increasing wall thickness to thin-wall combination, which improves processing efficiency.